12/27/2023 0 Comments Setting up tp link router![]() ![]() Get to know more details of each function and configuration please go to Download Center to download the manual of your product. Step 5: Connect your TP-Link router to the root router with an Ethernet cable (LAN to LAN) and test your wireless connection through your computer. Click SAVE (bottom of the list of DHCP Server settings), then click Reboot on the rightmost side of the top navigation bar for your changes to take effect. Step 4: Once you’ve logged back into the interface, click DHCP Server on the left panel. Note: After changing the IP address settings, you’ll need to reboot your router, then log back into the router with the new IP address. Change the LAN IPv4 to one on the main router’s subnet, then click SAVE.Įxample: If the root router’s IP is 192.168.0.1 with an IP range of 192.168.0.2-192.168.0.100 you would set the TP-Link device to 192.168.0.101 Input your Wireless Network Name (SSID) and Password, then click Save (bottom left of the screen) to save your changes. Step 2: Click Basic on the top navigation bar, then select Wireless on the left panel. Step 2 Log in to your TP LINK router Navigate to Network LAN and change the IP address of your TP-LINK router to the same one your TP-LINK router was. If needed, you may refer to How do I log into the web-based Utility (Management Page) of TP-Link wireless router? for more detailed information. Turn on the modem, and then wait about 2 minutes for it to restart. The default login username and password are both admin (all lower case). Connect the modem to your router’s Internet port with an Ethernet cable. Step 1: Log into the router using or the default IP address. Turn off the modem, and remove the backup battery if it has one. Enable the option that says VPN client, and then proceed to save this change of settings. How to setup TP-Link Wi-Fi Router on Tether APP. Open the tab labeled Advanced and click on the VPN client tab. Usually, more people have the same router as you and have already tried to set up a VPN. Find the model of your router and look for more information online. If you do not have the user manual at home, you can usually find it online. ![]() ![]() The default login username and password are both admin (all lower case). Launch your browser software and type your TP-Link router’s IP address on the Google Search bar to go to the control panel page. There are several ways to do that: Read the user manual of your router and look for OpenVPN or L2TP instructions. Step 1: Log into the router using or the default IP address. Note: To avoid connection issues during setup, make sure to complete the following steps through a computer wired directly to the router. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |